If you’re looking up how to repot rubber tree plants, you probably already have one. Whether you have the variety ‘Rubra,’ with dark green leaves and light-colored mid-veins, or ‘Tricolor,’ with variegated leaves, their needs are essentially the same. Rubber plants don’t mind being grown in pots because they originate in Southeast Asian rainforests where, like most rainforests, the soil layer is very thin and plants typically don’t root as deeply as those in temperate forests. Keep reading to learn more about rubber tree plant potting.
If your rubber plant is still small and/or you don’t want it to grow much or to grow slowly, your plant may only need a little top dressing. If this is the case, simply scrape off the top half inch to inch (1.2 to 2.5 cm.) of soil and replace it with an equal layer of potting soil, compost, or another medium that contains slow-releasing nutrients.
However, there will come a time when it is necessary to provide new space as well as nutrients to maintain the health and growth of your rubber tree plant. Potting it up is especially necessary if the rootball appears to be girdled, or growing around the sides of the pot. This tells you that you’re a bit past due for upgrading your plant to a bigger pot.
Pick a pot that is somewhat larger than your current one without being excessively bigger. Usually increasing the pot size by 3 to 4 inches (8-10 cm.) in diameter is sufficient for a large potted plant. If you use a pot that is too much larger than the current rootball, the soil may stay wet for too long after watering because there are no roots in the added soil to draw out the water, which can lead to root rot.
This is also a good time to consider the plant’s growth since the last time it was put in a pot. When repotting a rubber plant that has gained a lot of top growth, you may need to choose a heavier pot or weigh down the pot by adding some sand to the growing medium to prevent tipping over, especially if you have children or animals that may occasionally pull on the plant. If you do use sand, be sure to use a coarse builder’s sand and not a fine child’s play sand.
You’ll need the mix to contain a good amount of fertility in order to support the growth of the rubber plant for the next few months. Compost and potting soil both contain a good mix of slow-releasing nutrients that will help your rubber plant to thrive.
Once you have everything you need for repotting your rubber plant, it’s time to change pots. Remove the plant from its current pot and tease the roots some. This is also a good time to inspect the roots and perform any necessary root pruning.
Add a fair amount of your soil medium to the base of the new pot. Situate the rubber plant on top of this, adjusting as needed. You want the surface of the root ball just below the rim, and simply fill in around and over the root ball with soil. Be sure to leave about an inch (2.5 cm) or so of space from the rim of the pot for watering.
Water the plant well after repotting and allow the excess to drain out. Then care for your plant as normal.
Anni Winings obtained a bachelor degree in Dietetics/Nutrition, and merges that knowledge with her desire to grow as much healthy, tasty food for her family as possible. She also managed a public kitchen garden for a year in Tennessee, before moving to California where she gardens now. With gardening experience in four different states, she has gained a lot of experience in the limits and capabilities of different plants and different gardening environments. She is an amateur garden photographer and an experienced seed saver of many garden crops. She is currently working on improving and stabilizing certain varieties of peas, peppers, and some flowers.
The rubber plant is a tree that traces its origin to India and Malaysia. It gets its name from the fact that its sap is used to make rubber. But, you do need to be patient with it.
While it lives for hundreds of years, it takes 7 years of waiting before you can make the initial harvest. After that, it will be able to provide you with its valuable sap for the next 30 or so years.
But, most gardeners and homeowners are more concerned about its looks. That’s the reason why you’ll find this large plant in many homes.
Their size along with their unique oval-shaped rubbery leaves make them interesting pieces that complement any interior.
Plus, they’re long lifespan means that you don’t need to replace them anytime soon.
The suggested time of propagating your Rubber plant will be during the early sprigs to late summer. The reason behind this is that the plants need enough indirect sun for constant growth.
In most indoor plants, we propagate when we face problems. Sometimes it might be the last chance for saving the plant. Thus, even if the season is not right, there is no harm in giving it a try.
However, it is always suggested to propagate a healthy plant as they will develop sooner and flourish to be bushier.
Plants show complications if they are stressed while growing. Propagation during stress is not suggested.
Firstly, we try to revive the plant and bring it back to life and then propagate. This way, we get a healthy new plant.
Multiplication is another reason for the propagation. So, if you want to see your plants grow bushier, it will require a good pruning and proper propagation.
Last Updated: December 7, 2020 References Approved
This article was co-authored by Lauren Kurtz. Lauren Kurtz is a Naturalist and Horticultural Specialist. Lauren has worked for Aurora, Colorado managing the Water-Wise Garden at Aurora Municipal Center for the Water Conservation Department. She earned a BA in Environmental and Sustainability Studies from Western Michigan University in 2014.
There are 19 references cited in this article, which can be found at the bottom of the page.
wikiHow marks an article as reader-approved once it receives enough positive feedback. This article received 11 testimonials and 99% of readers who voted found it helpful, earning it our reader-approved status.
This article has been viewed 219,186 times.
Ficus trees are a family tropical plants, vines, and shrubs that make adaptable potted plants both indoors and outdoors. To keep your ficus plant healthy, transplanting it to a new pot or planter every few years is recommended. If your ficus tree has outgrown its old pot, prepare a new container for the tree in a suitable climate. Making the transplant as easy as possible on the ficus will help it thrive in its new environment and avoid trauma following repotting.