How to make a garden lounger: 4 options for making garden furniture for relaxation

How pleasant it is after a hard day to retire in the garden or sit on the lawn by the pond in order to relax, unwind and enjoy the sounds of nature. And what piece of garden furniture do most people associate with a comfortable stay? Yes, a garden lounger! A comfortable portable elongated armchair, in addition to its direct functional value, will act as a spectacular element of the exterior, emphasizing the style of the suburban area. There is nothing difficult in making a garden sun lounger with your own hands. We have selected for you several options for easy-to-manufacture sun loungers. Among them, it will not be difficult to choose a suitable model, which anyone can build.

Option # 1 - wooden lattice chaise longue

Such a chaise longue can be safely used instead of a bed: a flat surface, an adjustable back. What else do you need for an afternoon break ?! The only drawback of this design is that it is very problematic to move it around the site yourself.

Sun loungers of this design are very popular both among vacationers on the seaside and among owners of suburban areas.

But there is a way out! We propose to consider the option of a sun lounger equipped with rollers. To make a sun lounger, you need to prepare:

  • Glued spruce wood boards 18 mm thick;
  • Wooden beams 45x45 mm (for the frame);
  • Boards with a thickness of 25 mm for sidewall sheathing;
  • Jigsaw and screwdriver;
  • Drills with a diameter of 40 mm for woodwork;
  • 4 attachment corners for beds;
  • Countersunk screws;
  • 4 rollers 100 mm high;
  • Sanding sheet with grit 120-240;
  • Varnish or paint for woodwork.

Plates of the required size can be purchased at a carpentry shop or on the construction market. When choosing slabs, it is better to give preference to coniferous products, since they are more resistant to atmospheric precipitation.

The size of a chaise longue depends on the wishes of its owner. In most cases, the structure is made in the size of 60x190 cm. Having decided on the dimensions of the chaise lounge, we make two long and two short sidewalls from wooden bars. From them we assemble the frame of the structure, fixing it to each other with the help of mounting angles. We trim the outer side of the frame with boards.

On long slats at a distance of 5-8 cm from the corner, we fasten the legs of the chaise longue, the material for the manufacture of which were bars 5-10 cm long

We fix the legs to the boards using screws 60 mm long.

We mount the wheels: we install the rollers in the center of the short legs of the chaise lounge, fixing them with screws 30 mm long, equipped with a semicircular head with a diameter of 4 mm

To make a wooden lattice using a jigsaw, we cut 60x8 cm boards from plates.

We attach the slats to the lounger with self-tapping screws, leaving a gap of 1-2 cm.To maintain the gap, it is most convenient to use special spacers

When planning to make a chaise longue with an adjustable backrest, the lattice should be divided into two parts: a lounger and a headboard. We put both parts on connecting boards and fasten together with a door hinge.

To equip the fastening strip between the long bars of the chaise longue frame, we fix the transverse rail. We fix the support stand on the mounting bar, fixing it on both sides with screws

The finished chaise longue can only be processed by going through the grinder and opened with varnish or paint.

We offer you to watch a video that shows how such a model of a sun lounger is assembled:

Option # 2 - fabric chaise longue on the frame

Another equally popular chaise longue model that can be folded into an almost flat shape.

A light armchair is convenient to move around the site, choosing open sunny meadows for relaxation, or, on the contrary, shaded corners in the garden hidden from prying eyes

To make a folding deck chair, you need to prepare:

  • Rectangular slats 25x60 mm thick (2 parts 120 cm long, two 110 cm long and two 62 cm long);
  • Round slats with a diameter of 2 cm (one piece 65 cm long, two - 60 cm each, two - 50 cm each);
  • A piece of durable fabric measuring 200x50 cm;
  • Nuts and furniture bolts D8 mm;
  • Fine-grained sandpaper and round file;
  • PVA glue.

Slats are best made from hardwood species such as birch, beech or oak. For the manufacture of a sun lounger, it is better to use fabrics that are characterized by increased strength and resistance to abrasion. For example: canvas, tarpaulin, jeans, mattress teak, camouflage.

We cut the slats of the required length. Using sandpaper, we carefully grind the surface.

According to the diagram, where A and B denote the main frames, B represents the stop-regulator, we collect the main structural elements

In the long slats of the main frames, at a distance of 40 and 70 cm from the corners of the structure, we drill holes with a diameter of 8 mm, and then grind them using a round file.

To make it possible to change the position of the back in the chaise lounge, in frame B we make 3-4 cutouts at a distance of 7-10 cm. To equip the seat, we drill holes with a diameter of 2 cm, stepping back from the two ends of the rails. We install crossbars in the holes - round slats, the ends of which were pre-greased with PVA glue.

We proceed to the assembly of the chaise lounge: we connect parts A and B using screws pushed through the upper holes. By the same principle, we connect parts A and B, only through the lower holes

The frame is assembled. All that remains is to cut and sew the seat. The length of the cut is determined by the possibility of folding. Too short a cut will prevent the chaise longue from folding, and an excessively long cut will sag when disassembled. To determine the optimal length, you need to fold the chaise longue and measure the fabric: it should be slightly taut, but without effort.

A piece of fabric with processed edges is nailed to the round slats located on parts A and B. To do this, we wrap the crossbars with the edge of the cut, and then fix them with small nails with thick caps. An option is possible in which loops are made at the edges of the cut and put them on the crossbars.

Option # 3 - Kentucky folding chair

The original chair is assembled entirely from bars. If necessary, the chair can always be folded up and put away for storage.

The advantage of such a garden chair is that when disassembled, it does not take up much space, while the design is designed in such a way that it allows you to completely relax your muscles.

To make a chair, we need:

  • Wooden blocks 45x30 mm in size;
  • Galvanized wire D 4 mm;
  • 16 pieces of galvanized wire fixing brackets;
  • Fine-grained sandpaper;
  • Hammer and pliers.

For the manufacture of a chair, 50x33 mm bars are also quite suitable, which can be obtained by sawing a 50x100 mm board into three equal parts. The total length of the bars should be 13 meters.

Instead of galvanized wire and staples, galvanized studs can be used, the edges of which are secured with eight nuts and washers.

It is convenient to use a pivot table to determine the required number and length of wooden blocks. We make through holes according to the drawing

The diameter of the holes should be 1.5-2 mm larger than the thickness of the wire used. Having prepared the required number of bars, you should carefully process all the edges, sanding the surface with fine-grained sandpaper.

Let's start assembling the structure.

For clarity, we use the assembly diagram of the seat with dividers, as well as the back of the chair. The dotted lines indicate the locations of the through holes with a wire threaded through them.

On a flat surface, according to the scheme, lay out the bars for arranging the seat. Through-hole wire skips

Using the same principle, we assemble seats with dividers, connecting wooden blocks with pieces of galvanized wire

The main structural elements are assembled. We take the ends of the wire, holding the sides of the structure, and carefully raise the chair.

It remains only to cut off the excess wire with wire cutters, and then bend and secure the ends with the help of galvanized staples

Chaise longue for giving: 8 do-it-yourself models

The garden chair is ready. If desired, it can be coated with a semi-matt varnish for woodworking. This will significantly extend the service life of such a popular piece of garden furniture.

  • Print

Rate the article:

(15 votes, average: 4.7 out of 5)

Share with your friends!

Wooden deck chair with your own hands: design, diagram and drawings, photo

The chaise longue fits into the design of the garden, infield. The design features allow a person to completely relax after swimming in the pool. It is convenient to sunbathe, read a book, view the necessary information on your phone or tablet. For a summer residence, a country house, you can buy a sunbed or do it yourself.

The first models of sun loungers appeared in France. This happened in the 18th century, but since then the design of the long chair has changed little. As before, the classic models are popular:

  • folding with a backrest that can be fixed at different angles of inclination and a foot that can be lifted horizontally
  • not folding (monolithic), shaped like a lounger
  • duchess breeze, a combination of a comfortable chair and a convenient foot extension.

The chaise longue frame and seat are made of different materials. The design is complemented by descending or monolithic armrests, screens that protect from sunlight, wheels for moving around the territory, pillows, thin mattresses, and other accessories.

According to the type of design, sun loungers are distinguished:

  • soft
  • tough.

Do-it-yourself first option for chairs quickly and simply because the seat is made of fabric. It takes more time to make models of the second type. They have a lot of parts to fix.

Pallet furniture: pros and cons

This is not to say that in the use of recyclable materials, which, in fact, are pallets, everything is so cloudless. There are pros and cons in this setting. The former should be actively used, and the latter should be dealt with.

Furniture is assembled literally in a matter of hours.Such furniture will not successfully fit into any interior. Loft or country style is best.
There are many constructive ideas from this material.
The cost of the finished product is literally a penny.It is not easy to care for pallet structures - dust accumulates under them, which is not easy to clean.
The pallets are made of high quality natural wood.
The resulting products will be original and practical.If you haven't spent enough time processing wood, you risk making an unpleasant impression on your guests.
Almost any technique can be used to decorate wooden furniture.

Do-it-yourself wicket - how to make a wicket. Master Class

Often, the owners of summer cottages and private houses try to enclose their territory with a fence in order to restrict access for unauthorized persons. And in order to be able to enter your own possessions yourself, a passage is provided in the fence, which is closed and opened with the help of a wicket. Gates for summer cottages can have different designs, sizes, locking devices and are made from different materials and in different ways. Well, those who want to save money can make them with their own hands.

  1. The most common materials for the manufacture of gates
  2. Material selection and tool preparation
  3. Step-by-step instructions for making gates
  4. Finishing a wooden gate with paintwork

The most common materials for the manufacture of gates

A wicket, mounted in a fence, must match it in design, size and color scheme. Therefore, there are several options for the materials from which it is made. Before making a wicket, you need to choose one of them:

  • Lattice gate. If you are not embarrassed by the fact that part of your territory will be viewed from the street, then this option is quite acceptable. The advantages of the welded lattice structure are simplicity, economy, reliability and long service life. The downside is a rather boring appearance, which, however, can be embellished by welding on the lattice forged decorative elements. True, in this case, the cost can increase significantly.

  • Wicket door made of corrugated board. This design is blind, but very inexpensive. Its appearance is quite neutral, the price and quality correspond to each other. The advantage of a corrugated wicket door is its non-susceptibility to corrosion, which is achieved thanks to a special coating of this material. In this regard, products made from it have a long service life.

  • A wicket, finished with a metal sheet. This option is much more expensive than the previous one, but it looks much worse. To add beauty to this design, a metal sheet is mounted on forged decor elements. It should be understood that such decorations significantly increase the cost of the gate. There is also another finish option - a metal sheet with a stainless strip. The appearance of such a gate is quite effective and corresponds to the high-tech style. To decorate the canvas, various elements, inscriptions, coats of arms, etc. are cut out in it. Wickets, finished with a metal sheet, are distinguished by a long service life, sometimes exceeding twenty years.

  • A wicket, finished with clapboard. The cost of wooden gates varies significantly depending on the type of wood used, manufacturer, etc. If you use a pine board coated with oil dye as a material, then the design will come out very cheap. It is quite possible to make it yourself, but at the same time you should not expect beauty in appearance from it. But if you use more valuable types of wood, such as larch or oak, treated with special impregnations, then the design will look much more aesthetically pleasing. Wooden wickets have their advantages, but metal structures with wooden decor are considered much more reliable. And if the finishing elements become unusable, it will be possible to replace them without completely dismantling the structure.

  • Wrought iron gate. Such gates, photos of which are given in the section, are famous not only for their strength and durability, but also for their unusually beautiful appearance. True, they significantly exceed the above-described options in price, but the money spent is more than repaid due to the high quality and aesthetic pleasure experienced when looking at this design. The service life of forged gates is 15 years or more. They perfectly match the style of both old houses and newfangled cottages.

  • Wooden gates. This is another simple and economical option. A gate made of this material is easy to build and install with your own hands. But it must be remembered that although wood is cheap, it serves much less than metal. With proper maintenance, the structure can last no more than 10 years.

Consider a method of making a wicket with your own hands using the example of the simplest and most inexpensive wooden structure.

Material selection and tool preparation

As mentioned above, wood is an economical material, but short-lived. Therefore, in order to maximize the lifespan of a home-made gate, it is better to choose more expensive and high-quality wood. In this case, you will still be able to save money, because you will have to pay only for the materials, and you will do the work yourself.

Before making a gate, you need to select the building materials from which it will be created:

  • larch boards 2 m long, 14 cm wide and 2 cm thick - 10 pcs.
  • pine boards 2 m long, 15 cm wide and 5 cm thick - 2 pcs.
  • metal hinges - 2 pcs., latch and handle - 1 pc.
  • metal toothed plates - 6 pcs.
  • brass plates - 4 pcs., corner - 1 pc.
  • brass screws - about 40 pcs.
  • primer for wood - 1 can
  • protective agent - 1 can
  • varnish - 1 can.

To realize the set task, you need not only materials, but also tools of labor:

  • chisel and hammer
  • hacksaw for woodworking
  • screwdriver or drill with an appropriate attachment
  • plane
  • jigsaw
  • pencil for marks
  • sandpaper
  • building level
  • a piece of rope.

Step-by-step instructions for making gates

Installation work must be carried out in a strict sequence:

  • to fix the gate, it is best to take two aerated concrete pillars. Installation should begin with the manufacture of the sidewalls on which the wicket will be held. To do this, use pine boards. After they are vertically aligned using the building level, you should attach the finished sidewalls with self-tapping screws to the support pillars
  • This is followed by the assembly of the frame, which will consist of 4 carefully painted larch boards. Its corners are reinforced with brass strips attached to self-tapping screws.
  • to make the structure more rigid, metal toothed plates are used, which are slightly sunk into the wood during installation. Further, on the frame constructed in advance, hinges should be hung on which the wicket door will be held

  • after you have made sure that the frame fits in the opening of the wicket, a special brace is made, thanks to which the whole structure will become even more rigid. The brace is attached to the base by means of metal toothed plates
  • the finished frame is connected to the hinges, after which sheathing boards are mounted on it. Each of them should be fixed with at least two self-tapping screws, and corner boards with three. For each self-tapping screw, a hole is made, which is then countersunk in such a way that it is possible to drown the head
  • then the handle and latch are attached. At the last stage, having built a compass from a pencil and a rope, you need to draw an oval line along the top of the boards, along which you can cut the boards using a jigsaw.

When studying this master class, it becomes obvious that making a wooden swing gate is not a complicated process that requires special knowledge and skills. It can be mastered by anyone who knows how to hold simple tools in their hands.

Finishing a wooden gate with paintwork

A hand-made wooden wicket door will last longer if it is coated with paint and varnish, adhering to existing technology. It is necessary to purchase dyes intended for external work.

Before applying them, the boards should be treated with a wood preservative and primed thoroughly. For this, it is better to use a primer suitable for both wood and metal surfaces. For the best effect, the primer and paint must match.

After the soil has dried, three layers of dye are applied to the surface of the gate and thoroughly dried and then sanded.

If you decide to open the gate with varnish, then you need to act in a completely different way:

  • before starting work, the gate must be sanded, moistened with water, and then dried
  • then the surface is polished and coated with a pore-filling compound
  • after that, they are again treated with an abrasive and applied in three layers of waterproof varnish
  • finish the job with another sanding. It should continue until all flaws are invisible.

Yacht varnish is the most suitable for covering wooden wickets. Of course, it is not cheap, but it is famous for its high quality.

How to make a deck chair out of wood or plywood with your own hands - drawings, photos and work progress

Sun loungers are attractive because they are lightweight and can be used to relax anywhere - on the veranda, in the garden, when going out of town, and so on. Based on this, an appropriate design is selected - monolithic, sliding, portable (a very convenient option for transportation) and a number of others.

The cost of the simplest models of sun loungers available for sale starts at 3,080 rubles. On the one hand, it is attractive. But the main disadvantage of finished products is that many of them simply do not fit the buyer - one is in size, the second is in design, and the third is in the material of the frame. The conclusion suggests itself - to make a chaise longue with your own hands, namely "for yourself."

Features of the choice of materials


This concept is generalized. An important question is what breed to focus on. Before dealing with the blueprints of a sun lounger and the progress of work on its manufacture, it is worth clarifying which wood is best suited.

Firstly, mostly with their own hands (if we are not talking about a professional who works on orders) those who want to save reasonable money make something. Therefore, hardly anyone will use an expensive tree (for example, beech or oak).

Secondly, all breeds differ in different properties and characteristics, including the density of the structure (and this is the weight and ease of movement of the chaise lounge). Therefore, when choosing a tree, it is necessary to take into account the specifics of its operation, depending on which the corresponding drawing is developed.

Thirdly, such loungers for a house (apartment) are not purchased or assembled by hand. The main place for installing a sun lounger is outside the building (near the pool, at the summer cottage, and the like).

Consequently, the tree will be exposed not only to dampness, but also to sunlight. And here is some contradiction. Conifers are less susceptible to rotting, but when heated, they "tarry".

Even if the lounger after manufacturing and treated with varnish (paint), this is not a way out.

Therefore, for example, it is undesirable to use a cheap spruce for making a sun lounger. In addition, not everyone can tolerate the tart smell of resin. On the Internet, there are numerous tips for assembling a sun lounger with your own hands from this particular tree. The author has already outlined his arguments against. Well, it is up to you, the reader, to take them into account or not.

  • Larch. Strength, durability will be ensured.
  • Ash. Good texture, ease of processing are the advantages. Cons - it will cost a little more, and it is not very suitable for a portable model of a chaise longue due to the density (hence, weight) of the tree. Although for a stationary sunbed - one of the best options.


There are a lot of different schemes, drawings of sun loungers. In some cases, in the manufacture of such a do-it-yourself lounger chair, not solid wood is used for individual structural elements, but materials based on it.

Mainly multilayer plywood. This partially reduces the overall weight of the product. The range of such products is quite large, but this does not mean that you can take any kind of it.

Of the budget options in the private sector, two types of plywood are popular - FC and FSF.


The sizes of their sheets and the main characteristics are almost identical. The fundamental difference is in the adhesive used to hold the veneer layers together. The PSF used in the manufacture is somewhat toxic.

That is why this type of plywood is recommended only for external work (continuous sheathing for a soft roof, facade cladding, and so on). Therefore, it is definitely not suitable for a sun lounger - only FC.

In terms of "environmental friendliness" there are no complaints about it.

The cloth

In some models of sun loungers it is also used. There are few criteria here - strength, minimum elongation and susceptibility to fading.

Therefore, you should focus primarily on the material that is quite dense and monochromatic.

The fact is that dyes (pigments) fade with varying intensity, and “bald spots” may gradually appear on the canvas with bright patterns.


For this point, in short - with a protective coating or made of stainless metals (alloys). Since sun loungers are often made for outdoor installation, corrosion of the "iron" cannot be avoided. "Rzha" will quickly show through even through the paint, and in terms of maintainability (with the replacement of individual parts) difficulties will arise.

Examples of drawings of sun loungers

For the owner, who is used to doing everything with his own hands, it is not difficult to develop his own model. Moreover, if you know exactly what the result should be. Examples can suggest some ideas, features of engineering solutions - and nothing more.

  • A chaise longue is almost always made for one user. Therefore, its optimal length (in the unfolded position) is 200 ± 10, and its width is 65 ± 5 (cm).
  • The optimal parameters of lumber are considered (in mm): sheets (slabs) with a thickness of 10 to 15, bars - from 3 x 4 to 5 x 5, boards - for 15. This is quite enough to ensure the reliability of a chaise longue in combination with a low weight. The use of larger samples (there are similar models, judging by the drawings) is impractical. On such pieces of furniture, unlike chairs, beds, sofas, children will not jump. And the wooden blanks of the indicated dimensions, the weight of one person, especially in "static", will withstand quite well.

Do-it-yourself sun lounger - work progress

Tree markup

When making simple models of sun loungers, this is easy to do, having a ready-made drawing, and, accordingly, the dimensions of all components. The only thing that needs to be taken into account is the rationality of using lumber. In other words, make the markings in such a way as to minimize waste.

It is more difficult if the chaise longue has some curly structural elements - handles, supports, and so on. In this case, you will have to make patterns.

First, a given detail is drawn on a sheet of graph paper, then its dimensions are projected onto thick cardboard. A workpiece is cut out of it, superimposed on the lumber, on which its outline is outlined. Next - sampling of wood.

If we are talking about plywood, then the easiest way is to make cutouts with your own hands using a jigsaw.

Processing parts

  • This applies to both surface grinding and rounding of all faces. Whatever tool is used to cut wood, its microscopic fractions along the cutting line will certainly remain. And these are potential splinters.

Wood, regardless of the variety, is affected by mold and mildew. It's all about time, and this largely depends on the breed and operating conditions. But in any case, impregnation with antifungal drugs (antiseptics) is necessary.

Drying lumber

In this case, it means its additional exposure before assembling the sun lounger, after impregnation. Even if the tree was initially picked up dry, then it is highly likely that during storage it was partially saturated with moisture.

Therefore, drying after processing does not hurt. At the same time, it will be possible to make sure that the geometry of the parts is not violated.

If any curvatures appear, then it is better to level them immediately than to disassemble the finished chaise longue and eliminate the shortcomings (or completely replace the part).

Assembling the structure

There is a drawing on which, in addition to the dimensions, and the places of joining of the parts are indicated, so the algorithm of actions is chosen independently. Some features worth noting:

The specificity of fastening structural elements raises many questions. What to use?

Firstly, only self-tapping screws are used as fasteners, and for wood. Nails are not suitable for these purposes because they easily split dry material.

And it is not always possible to score them strictly vertically. Given the small thickness of wood blanks, it is not a fact that the tips of the fasteners will not come out.

In terms of maintainability, self-tapping screws also benefit - it is not difficult to disassemble / replace a part / assemble a sun lounger.

Secondly, you should not limit yourself to only one fastener. You definitely need to think about strengthening the structure. How to do this depends on the skills of the master and the specific scheme. Thorn-groove connections (with glue fit), corners, planks, earrings - there are enough options.

Installation of fasteners also has its own peculiarity. So that cracks do not appear in the tree, and the self-tapping screw goes without distortions, a channel is first drilled. The section is slightly smaller than that of the hardware leg. Further - a chamfer (along the diameter of its head), with the expectation that it "drowned" by about 0.

5 - 1 mm. It is not difficult to disguise the fasteners in the tree. On sale there are not only sealants and mastics, but also plastic mini-plugs designed specifically for hiding connecting elements in furniture. Moreover, any color, so that you can choose to match the overall design of the chaise lounge.

If it turns out to be massive enough, you should consider installing roller supports in the lower parts of the legs. You can find a suitable option in furniture stores. Such a chaise longue will be easy to move alone.

These are the main recommendations, since do-it-yourself assembly is a creative process. Having a ready-made drawing of a chaise lounge and minimal skills in working with the simplest household tool, it will not be difficult to make individual structural elements and assemble. The main thing is to think over everything carefully, and success is guaranteed.

Watch the video: DIY. Modern garden wood processing project - Make Sofas Outdoor From Pallet Wood

Previous Article

Information About Pineapples

Next Article

The benefits and harms of walnuts for the human body